Products

HY Horizontal piston pusher centrifuge

Structure and Features:
The main motor drives the basket to rotate at a full speed,material being fed into through a feed pipe and distributed evenly on filter screen walls of the basket inner sect.Under the centrifugal force,the liquid is discharged out of the basket through filter screen and the holes of the backet,and then out of the machinge through the tube for dicsharging liquid,while the solid deposits in the basket as a ring layer of cake.As the pusher plate is rotating at tile asme speed as the basket,it is pushed by the piston to reciprocate continuously and axially,thus pushing the cake layer to move out of the basket and then out of the machine from its from its front base.

Products are mainly used:
HY Series are a kind of pusher filtering centrifuge with continuous operation.They can perform feeding,separating washing and discharing in sequence at their full-speed running.This has the advantages of continuous operation,stable performance, easy operation, 1arge capacity,ideal washing effect and low moisture content of cake.They can be used for separating the suspension with solid phase particle size of more than0.1 mm and with the concentration of over 40%. They are suitable rot chemical industry,fertilizer, manufacturing salt and alkali,especially suitable for the solid-liquid separation of ammonium bicarbonate, ammonium chloride, mirabilite, etc.

Product Drawing :



Machine Technical Parameters:

Model
HY800-N
HY1200-N
Basket Diameter 800 1200
Length of filtering 400 500
Max speed 700/800/900 500/650
separating factor 220/287/363 170/284
Max loading 70 130
Length of stroke 40 50
Freqency of stroke 1/min 40 30
Main motor power kw 18.5 30
Oil punp motor power kw 11 22
Mpa Operating pressure 2.0-3.0 2.0-30
External dimensions L×W×H 2270×1780×1400 3165×2119×1912
Production Capacity 8-12 15-20
Weight 4000 7700

Special Note.

1.The technical parameters provided in the instructions of products are preferable.
2.The customer who asks about products please inform us of the characteristic parameter of material and operate condition.
3.The design and manufacturing of individuation are available: Material: Common stainless steel, special stainless steel or titanium alloy can be used for the material of the parts suspension contacts. Type of motor: Conventional type of explosion-proof type single-speed motor.
Filter screen gap width:0.1-0.4mm.
Designs and rnanufacturing are supplied according to the standard of GMP.
Other technical demands may be discussed.

  Order                   Back