Structure and features:
1. Well-designed structure leaves no place depositing dusts and makes the machine clean easily. The modules are designed smoothly and polished on the surface. The case, fixing parts and drums are made of stainless steel, With hinged enclosure cover, it is easy to clean the gap between the case and the drum.
2. Simple structure makes repairing easily.
3. Wide range applications.
4. Inverter startup, smooth starting, adiustable relative centrifugal force.
5. No damage to the particles.
6. Discharging solids from suspended bag is highly efficient with low labour intensity.
7. Nitrogen protection system ensures segregating the air outside from the machine chamber.
8, Automatic online washing system cleans the internal wall of the case, the arum and liquid slot to meet the clean requirements in accordance with GMP standards.
9. Leak-proof structure with silicone rubber or fluoroelastomers mersseals. It is of anti-explosion applied to poisonous, flammable and explosive environment.
Our machinery can be used for chemical or pharmacy manufacturing. It should be specifically chosen so as to meet the technical and economical requirements.

Products are mainly used:
SD type centrifuge is a high performance punching bags punching bags discharge intermittent operation of centrifugal filtration equipment. Applicable to solid-liquid ratio of, 5% -60%, solid-phase particles>0.01 mm, easy compression, require washing, liquid viscosity of the suspension of small solid and liquid separation operations, not only suitable for small quantities of many varieties of materials separation, also suitable for high-volume production. Widely used in pharmaceutical, chemical, mining, light industry, food and other areas. For example: gypsum, ammonium sulfate, Glauber's salt, iron sulfate, copper sulfate, nickel sulfate, potassium chloride, sodium acetate, borax, soda, rubber additives, dye, plastic raw materials, soap, grease, all kinds of resin, salt, monosodium glutamate, food additives, starch, sugar, vitamins, antibiotics, herbicides, copper, zinc and aluminum slag dehydration.

Products are mainly used:
SD punching bags centrifuge its drive motor can use the clutch to start, but also by the frequency control system controls, start smooth power through the V-belt will be passed to the drum, drum drive to make high-speed rotating drum around its own axis to create centrifugal force field until the materials are separated from the upper part of feeding tube into the high-speed rotation of the drum within the centrifugal force field, the material uniformly distributed in the drum wall, the liquid through a solid-phase materials and bag the cracks, holes through the drum Rejection to the shell cavity, from the chassis, a liquid discharge port, solid-phase materials were trapped in the bag inside. After the shutdown, open the lid (with a specially designed balance of help devices), pull out the blue cover locking bolt, with a special spreader to lift the cake out of machine set up outside the place of discharge, that is, to complete a cycle of work. Covered with a washing machine pipe materials can be washed.

Main Technical Parameters:

Drum diameter 800 1000 1200 1250 1500
Work capacity 100 170 250 350 500
Speed 1200 1000 900 950/1050 800
Maximum separation factor 640 560 543 631/771 537
Pack material limited heavy 135 230 300 450 700
Motor power 7.5 11 15 18.5/22 22/30
Shape dimension
(dimensions) mm
1780×1450×1200 2000×1580×1300 2380×1740×1480 2420×1830×1600 3700×2100×1600
Machine weight 1700 2000 3000 3300 5000
  Order                   Back